50 ton Marine Dual Power Material Handling Equipment YGSGZ500

1.Product Introduction

1. The power system is driven by an engine or a three-phase motor, which is flexible and flexible. Driven by electric motor, it has low maintenance cost, no pollution and low failure rate. Motor operation is one-third of the cost of engine operation;
2. The electrical system has protection functions such as overcurrent, overload and leakage;
3. Double pump double circuit total power regulation, negative flow control open system, reasonable allocation and utilization of motor power;
4. Double pump combined flow and multi-action compound to improve work efficiency;
5. Normally open rotary and travel brake. Independent oil cooling system, hydraulic oil cooler has large heat dissipation area and good heat dissipation effect;
6. Italian hose, seal and Trelleborg cylinder seal, completely solve the hydraulic system does not seep;
7. Enhanced working device for integral bending arm, gooseneck curved lever and various working grippers;
8. The computer optimized design of the working device, the box structure to achieve a reasonable high-strength structure;
9. Multi-function instrument panel, detecting various pressures, temperatures, oil levels and sound alarms;
10. Three-dimensional air supply, fresh air circulation, fluorine-free environmental protection, large-capacity automatic heating and cooling air-conditioning system;
11. Fixedly increased streamlined appearance driver’s cab, shockproof and soundproof, wide view, safe and comfortable, providing a car-like working environment;
12. Optional rotary motor head makes the gripper have 360° rotation function, especially for directional materials, which has better gripping effect.

2.Parameter

Item		Unit	YGSGZ500
Work weight		kg	49800
Shipping size		mm	21000x9500x4550
Engine	Model	Cummins	6LTAA8.9-C325
	Power	kw	239
	Speed	rpm	2200
	Max.torque	n.m	1350
	Dispiacement	L	8.9
	Specific fuel consumption	g/kw.h	222
	Fuel tank capacity	L	390
Motor	Model	/	Y315M-4
	Power	kw	132
	Speed	rpm	1480
Hydraulic system	Main pump	Kawasaki	K3V180DT
	Rated flow	L/min	2×320
	Working pressure	Mpa	31.5
	Main valve	Parker	UX32-18
	Hydraulic tank capacity	L	504
Hydraulic motor	Swing motor	SUNJIN	SH360
Performance parameter	Swing speed	rpm	0-12
The cab	Overall dimensions	mm	1800x1000x1620
swing ring	Orbital diameter	mm	1465
Hull	Overall dimensions	mm	21000x9500x1500
Slip ring		400A
Cylinder		Korean technology imported seal

3.Main Dimensions

Main dimensions	Unit	YGSGZ500
Upper full width	mm	3300
Cab High Level	mm	1200
Tail swing radius	mm	4600
Boom length	mm	9600
Stick length	mm	5000
Capacity	m³	0.7-3
Max. grabbing radius	mm	13865
Min.grabbing radius	mm	3200
Max. weight in the snatch snatch radius	kg	2000

4.Product Features

1).Full hydraulic operation
The entire operating system is hydraulically controlled, not mechanically controlled.
2).Fully imported configuration
Main pump main valve rotary reducer assembly, travel reducer assembly, pilot handle, the whole vehicle hose is Italian.
3).High safety factor
4).High working efficiency
5).Air conditioning and air seat
6).Long lasting
7).Centralized lubrication system, easy maintenance